New Technology
The Leader of Thermal Spray Coating
- New Technology
- Introduction of New Technology
Introduction of New Technology
Polymer Coatings by Polymer Flame Spray Unit
The coatings are put by powder compositions on a basis of thermoplastic polymer with filling compounds(oxide, metals, minerals) by method of thermal spraying in a torch of a propane-air flame. The process of coating can be realized as in conditions of the specialized site, and as direct on a place of operation without disassembly of the unit. The coatings may be put both on metal products and on elements of building from concrete, brick, tree, glass, etc.
- Technical specification of coatings
- Adhesion of coating, MPa : 80.0 - 10.5
- Productivity, kg/h : 2.5 - 3.4
- Coefficient of material utilization : 0.85(85%)
- Spraying material - Polymer Powder
- Particle size, μm : 40 - 300
- Melting point, ℃ : 90 - 400
- Weight of thermal sprayer, kg
(without spraying material) - 0.89
The polymer coating can be used to prevent corrosion, and for the other applications as below.
Pipeline, Supports, Towers, Metal designs of systems of radar-tracking supervision, Equipment on a storage and filling of fuels and oils
Urgent repair of the damaged isolation on the power electrical equipment
Processing of surfaces of fireboard and chipboard of plate for increase of moisture resistance, Stop valves of gas pipeline / Prevention of icicle
